How to make a corner shower shelf using tile

If you don’t want the cluttered look  of a shower basket hanging off of your shower arm or can’t afford a pre-fabricated recessed niche when tiling your new shower, an easy and great solution would be to build a corner shelf using the same tile!

Shaving ledge

 

Soap and shampoo shelf

 

 

The process is the same for a shampoo/soap shelf or a shaving ledge:

1) Determine location

Once you determine the height of your shelf, mark the location in the corner so that when you are cutting the backer board, you can leave a horizontal cut out for the shelf.  Allow enough room for the tile shelf  to slip in snugly.

2)  Cut a shelf to fit in the corner

Sometimes a 45 degree cut is all you need but if you want it larger, you may have to play with your angle a bit more.

3)  Tile up to the shelf

Tile up to the self and using a stacked spacer in the corner where both walls join, lay the tile shelf in place.  The additional spacer gives it a slight angle so that water will run off.

4)  Cut an L tip on the next tiles for the top

The little “L” helps to hold the shelf in place once its grouted.

5)  Grout as typical

 

 

Published in: on January 12, 2011 at 4:28 pm  Leave a Comment  
Tags: , , ,

The URI to TrackBack this entry is: https://agirlcandoit.wordpress.com/2011/01/12/how-to-mak-a-corner-shower-shelf-using-tile/trackback/

RSS feed for comments on this post.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: